Hot Selling Wholesale Excavator Bucket Teeth

Reasonable bucket tooth design can be called the "secret weapon" to improve work efficiency. It covers many key aspects, and each detail plays a decisive role in the actual performance of the bucket teeth.

1. Blade shape: the game between efficiency and durability
The blade shape of the bucket tooth directly affects the excavation efficiency and durability. When excavating soft materials such as ordinary soil and soft clay, sharp and thin blades have significant advantages. It can cut in easily like a dagger, greatly reducing the excavation resistance and making the excavation action fast and efficient. For example, in the foundation excavation of urban construction sites, excavators equipped with such blade bucket teeth can quickly dig up and load soft backfill soil, shortening the construction period. However, in the face of hard rocks, frozen soil blocks, etc., thin blades are not thick enough, and frequent contact is easy to wear or even crack, and the durability is poor.

Wide and thick blades are suitable for excavating hard materials. In mining scenarios, the rock is hard, and the wide and thick blade can effectively disperse the huge pressure from the hard rock with its thick structure. Even if it is rubbed and collided for a long time, it can maintain good integrity, and the wear rate is much lower than that of the thin blade, and the wear resistance is excellent.

2. Connection method: selection of adaptation needs
The connection method between bucket teeth and bucket is related to the convenience of equipment maintenance and operation stability. Common ones include bolt connection and pin connection.

Bolt connection is easy to disassemble. Bucket teeth are frequently replaced as wearing parts. Maintenance personnel can quickly unscrew the bolts with simple tools to complete the replacement, saving maintenance time and labor costs. It is suitable for scenes with stable working environment and frequent replacement of bucket teeth, such as small excavators for urban road construction. However, during high-intensity impact operations, bolts are easy to loosen, affecting the stability of the connection.

Pin connection is strong and can withstand greater impact force. In high-intensity working environments such as large-scale mining and water conservancy projects, it can ensure that the bucket teeth are still closely connected to the bucket under extreme stress. However, its disassembly is relatively complicated, requiring professional tools and operating skills, which increases the difficulty of maintenance. Therefore, it is necessary to choose according to the actual working intensity and maintenance needs. If the working intensity is high and the connection is stable, choose pin connection; if you pay attention to the convenience of daily maintenance, choose bolt connection.

Yuezhong Casting, as a professional excavator parts manufacturer, focuses on the production of high-hardness alloy steel bucket teeth for excavators, providing customers with high-performance and durable products. We use advanced precision casting technology, strictly follow industrial standards, and carefully build each bucket tooth to provide solid and reliable guarantees for the efficient operation of Caterpillar excavators.

Yuezhong Machinery fully respects customers' pursuit of product personalization.
In terms of color customization, we provide a wide range of options, from eye-catching yellow to calm black. No matter what specific color, it can help the bucket tooth appearance to perfectly match the Caterpillar excavator and show a unique style.
In terms of size customization, we have demonstrated excellent capabilities. According to the drawings, samples and detailed requirements provided by customers, no matter what type of excavator Caterpillar is facing, Yuezhong can accurately build suitable bucket teeth to ensure its best compatibility with the equipment and give full play to the maximum working efficiency.

Yuezhong Casting has a rich product model and wide compatibility, which can meet the needs of different types of Caterpillar excavators and provide customers with more choices. The following is a compatibility list of some products that are compatible with Caterpillar excavators:​







Part Number



Compatible accessories





LC350RC​



320 ​series





TZ200203​



1U3202RC​





TZ200178​



6Y3222 - RC​





TZ200179​



IU3252RC​





TZ200167​



IU3302RC​





TZ200058​



E320 - RC(IU3352RC)​





TZ200189​



220 - 9093​





TZ200194​



505 - 4097​





TZ200176​



7T3402 - TL​












In terms of product packaging, Yuezhong also provides customized services. According to the size, quantity and transportation requirements of the bucket teeth, we design a suitable packaging solution to ensure that the bucket teeth are properly protected during transportation and safely delivered to customers.

In the field of engineering machinery, bucket teeth are key components that directly contact materials, and their wear condition directly affects the work efficiency and safety of equipment. This article will introduce in detail the wear judgment criteria of bucket teeth to help you accurately grasp the replacement time. At the same time, combined with the professional products of Yuezhong Loader Bucket Teeth, it provides the best maintenance plan for your equipment.

1. The hazards of bucket tooth wear and the necessity of replacement
Bucket teeth will inevitably wear out during long-term use, but excessive wear will bring a series of serious consequences:
Work efficiency drops significantly: Severely worn bucket teeth will reduce penetration and increase operation time
Fuel consumption increases significantly: The equipment needs more power to complete the same workload
Risk of equipment damage: Excessive wear may cause damage to the bucket body or other components
Operational safety hazards: Broken tooth tips may cause safety accidents


#unit-zWoERvdo0AG7uY3 .ce-image_inner{justify-content:center;}#unit-zWoERvdo0AG7uY3 .ce-image_item{--svg-color:rgba(221, 41, 78,1);}#unit-zWoERvdo0AG7uY3 .ce-image{--image-effect:1;}#unit-zWoERvdo0AG7uY3{padding-right:1vw;}









#unit-XiQKEFJCJnjMh5Z .ce-image_inner{justify-content:center;}#unit-XiQKEFJCJnjMh5Z .ce-image_item{--svg-color:rgba(221, 41, 78,1);}#unit-XiQKEFJCJnjMh5Z .ce-image{--image-effect:1;}#unit-XiQKEFJCJnjMh5Z{padding-left:1vw;}











2. Key wear judgment criteria
1. Tooth tip wear degree (core standard)
Mild wear (<1/3): can continue to be used, regular inspection
Moderate wear (1/3-1/2): recommended to prepare for replacement
Severe wear (>1/2): must be replaced immediately
Extreme wear (>2/3): equipment safety has been endangered


3. Professional inspection methods and techniques
Visual inspection method: use a wear gauge to compare the standard size of the new tooth, check whether the tooth tip has "hook-shaped" deformation, and observe whether there are cracks or gaps
Performance evaluation method: operating efficiency drops by more than 15%, equipment vibration increases significantly, and abnormal noise occurs
Professional measurement tools: caliper to measure key dimensions, hardness tester to test material properties, ultrasonic flaw detection to check internal defects


4. Yuezhong Loader Bucket Teeth's high-quality solutions
As an industry-leading bucket tooth supplier, Yuezhong Loader Bucket Teeth provides a full range of wear solutions:
1. High-performance product series
Ultra-wear-resistant alloy teeth: extended average service life
Quick replacement system: reduce downtime
Customized design: adapt to various working conditions
2. Professional technical support
Free wear assessment service
Optimal replacement cycle calculation
On-site installation guidance
3. Economic advantages
Higher cost performance than original accessories
Bulk purchase discount
Old tooth recycling plan


5. Practical suggestions for extending the service life of bucket teeth
Correct installation: ensure that the tightening torque meets the standard
Reasonable use: avoid impact caused by improper operation
Regular maintenance: clean up the accumulated material in time and check the fixing status
Working condition matching: select the tooth type suitable for the hardness of the material
Rotation use: implement planned position rotation

Conclusion
Accurately understanding the wear condition and replacement time of bucket teeth is the key to ensuring efficient and safe operation of equipment. Yuezhong Loader Bucket Teeth provides a full range of wear solutions for your equipment with professional products and services. When the tooth tip wear exceeds 1/3, please contact us in time to obtain the most suitable replacement suggestions and high-quality products.

In the rigors of mining and construction, the efficient operation of excavators relies entirely on the bucket teeth! As core components that directly interact with soil, rock, and hard rock, choosing the right bucket teeth is like choosing an "accelerator" for project efficiency and a "shield" against equipment wear and tear.


#unit-H9gdUwMx5QPWOut .ce-image_inner{justify-content:center;}#unit-H9gdUwMx5QPWOut .ce-image_item{--svg-color:rgba(221, 41, 78,1);}#unit-H9gdUwMx5QPWOut .ce-image{--image-effect:1;}









#unit-SccNIO3xka3C1oP .ce-image_inner{justify-content:center;}#unit-SccNIO3xka3C1oP .ce-image_item{--svg-color:rgba(221, 41, 78,1);}#unit-SccNIO3xka3C1oP .ce-image{--image-effect:1;}











Our bucket teeth, from material to craftsmanship, withstand rigorous testing:


High manganese steel and wear-resistant alloy options are available: For soft earthwork, choose high manganese steel teeth. Impact-hardened for wear resistance and durability, they provide 500-800 hours of reliable operation. For hard rock mining, choose wear-resistant alloy teeth. HB600+ ultra-high hardness offers a service life 2-3 times that of standard teeth, reducing downtime for frequent replacements and ensuring continuous operation.


Modular construction allows for easy maintenance: The "tooth adapter + tooth tip" design, coupled with quick-change pins, allows replacement in just 5 minutes. This eliminates the need for a dedicated team and significantly reduces maintenance costs. Precisely adapted for all excavator brands and models, from 1-ton micro excavators to 50-ton excavators, you can find a perfectly matched "excavator tooth."


Bionic structure reduces drag and increases efficiency: The tooth tip curvature mimics the morphology of natural teeth, reducing cutting resistance by 20% and distributing impact forces more evenly in hard rock mining. This not only increases excavation efficiency by 30%, but also reduces bucket lip wear, extending bucket life by 3-5 times, and indirectly saving you tens of thousands of yuan in equipment maintenance costs!


Whether it's rock-breaking mining operations, earthwork excavation for municipal construction, or soft soil treatment for farmland improvement, our bucket teeth are tailored to the specific needs and deliver uncompromising quality. Each tooth undergoes multiple casting, heat treatment, and precision machining processes, ensuring pinhole- and crack-free operation. The rust-resistant coating ensures corrosion resistance even in humid environments, ensuring extended storage and use.


Bucket teeth are crucial for efficient construction! Choose our bucket teeth and put an end to slacking excavators. Each dig is more powerful, and every investment is more valuable, helping you easily overcome various construction challenges and efficiently advance project progress!

任何操作挖掘设备的人都知道，安装铲斗齿不仅仅是组装零件——关键在于理解其锁定机制。卡特彼勒K系列无锤式铲斗齿系统采用卡扣式设计，正确安装后无需锤击即可牢固连接。然而，大多数操作人员忽略了一个关键点：看起来已安装到位和真正锁定到位之间存在着很大的区别。
本指南将逐步讲解如何将K系列齿连接到适配器上，重点介绍保持器的定位——这一细节决定了齿在受力时是保持紧固还是松动。我们还将介绍如果在安装过程中感觉有任何异常应该检查哪些方面：保持器无法干净利落地卡入到位几乎总是一个危险信号。

为什么卡扣式设计至关重要
K系列采用卡扣式固位体，无需锤击即可固定牙齿。这种固位体不仅能固定牙齿，还能与适配器鼻部和牙齿窝相互咬合，形成机械锁定。如果忽略这种咬合，牙齿可能感觉牢固，但实际上并未完全就位。更糟糕的是，部分咬合可能暂时有效，但最终会失效，这比明显松动的牙齿危险得多。
如果您习惯了传统的销钉式固定系统，那么在安装 K 系列适配器时，请不要依赖肌肉记忆。销钉式系统的工作原理是将紧固件滑入对齐的孔中——要么就位，要么没有。而 K 系列固定器则需要滑入到位，然后卡入锁定点。这意味着安装的手感和验证方式都截然不同。

K系列铲斗齿安装步骤详解
1. 首先将固定器安装到适配器上
首先将保持器放在适配器的前端，而不是牙齿上。大多数安装从一开始就出错，原因就在这里。保持器需要以特定的方向放置在适配器的保持槽内。理想情况下，它应该自然地放置在槽内，无需任何角度的强行调整或施加压力。
正确安装的感觉：固定器应该能轻松滑入凹槽。如果您握法错误或需要用力按压才能安装到位，请立即停止——说明您装反了。这一步看似微不足道，但位置错误的固定器无论之后施加多大的力都无法正确锁定。
2. 将牙齿与适配器鼻对齐
将保持器松散地套在适配器上，然后将牙齿窝与适配器的鼻端对齐。牙齿应该能顺畅地滑过适配器的鼻端，保持器则位于适配器和牙齿窝内表面之间。此时保持器尚未锁定到位——您只是在将这三个部件调整到正确的位置。如果牙齿无法轻松滑入，请检查牙齿窝内是否有碎屑，或者保持器是否从凹槽中滑出。
3. 用撬棒将牙齿固定到位
这是实际安装步骤。将撬棒插入牙齿和适配器底座之间，轻轻用力，将牙齿完全推入适配器前端。随着牙齿移动到最终位置，保持器会被压缩——如果所有部件都对齐——就会牢固地卡入锁定点。
你需要听到的咔嗒声：这不是轻柔的敲击声或刮擦声，而是清脆的机械咔嗒声，你能通过撬棒感觉到。如果没有听到清晰的咔嗒声，则表示固定件没有锁定到位。有些操作人员会将金属刮擦声误认为是正确啮合，但两者截然不同。刮擦声通常意味着固定件滑过了锁定点而没有卡住。
切勿使用撬棒过度用力。如果牙齿仍然无法就位，则说明某个部件错位——几乎总是保持器错位。强行撬动可能会损坏适配器的保持槽或使保持器变形，从而形成暂时的“牢固”连接，但这种连接在工作载荷下会失效。
4. 目视和触觉检查锁具
安装后，检查保持器是否完全嵌入适配器的保持槽和牙槽窝内。保持器应与槽口齐平，不得倾斜、突出或部分外露。轻轻晃动牙齿：轻微晃动属于正常现象（由于制造公差），但如果出现明显的晃动或翘起，则表示保持器未牢固固定。
安装问题排查
如果卡扣无法卡入到位，最常见的问题是卡扣槽内有碎屑。灰尘、水泥浆或锈迹都可能阻碍卡扣完全就位。彻底清洁卡扣槽后再试一次——这可以解决大多数K系列产品的安装问题。
另一个常见问题是保持器磨损或损坏。多次重复使用或严重磨损的保持器会失去弹力，无法牢固地扣合到位。安装前，务必检查保持器是否存在变形、裂纹或过度磨损。使用损坏的保持器虽然短期内可以节省时间，但往往会导致牙齿脱落——这是一个代价高昂的错误。
无损拔除K系列牙齿
拆卸步骤与安装步骤相反。将撬棒插入牙齿和适配器之间，利用杠杆原理稍微抬起牙齿——这样可以减轻保持器上的压力，使其脱离保持器凹槽。一旦松动，牙齿即可轻松地从适配器前端滑出。
重要提示：切勿在未先松开保持器的情况下撬下牙齿。在保持器锁定状态下强行撬动可能会损坏适配器的保持槽，从而导致以后安装在该适配器上的所有牙齿出现问题。
为什么高质量组件能让安装更轻松
当所有部件都符合精确的公差要求时，K系列齿轮的安装过程会非常顺利。低质量的保持架或适配器（例如槽口尺寸不一致的部件）会使安装变成令人沮丧的反复试验过程。对于需要快速高效更换齿轮的作业而言，投资购买设计精良的部件至关重要。
像岳中铸造这样的制造商专门生产K系列兼容零件，这些零件经过精心设计，尺寸精度高，能够实现可靠的卡扣配合。当卡扣和适配器符合规格时，安装时会发出清晰的咔嗒声，齿轮在运行过程中也能牢固锁定到位——这就是无锤系统的优势所在。https://www.loaderbucketteeth.com/


解答 (FAQ)
如何判断K系列适配器上的固定夹是否安装正确？
它应该自然地卡入适配器的固定槽中，无需用力或调整角度。如果您在安装齿之前需要按压才能将其固定到位，则说明它的方向装反了。
K系列牙齿安装过程中，正确的啮合声音是什么样的？
一声清脆的机械咔嗒声——你会透过撬棍感觉到。这不是刮擦声或轻敲声。
为什么我的 K 系列齿轮用撬棍无法卡入到位？
最常见的原因是挡圈槽内有碎屑、挡圈位置不正确，或者挡圈磨损失去弹簧张力。在施加更大力之前，请先清洁挡圈槽并检查挡圈。
拔牙后，K系列保持器可以重复使用吗？
是的，但要仔细检查它们是否有变形、裂纹或磨损。损坏的保持器可能感觉已经就位，但实际上无法锁定到位，这会导致牙齿在工作负荷下脱落。
哪里可以找到可靠的K系列兼容组件？
选择像岳中铸造这样在土方机械零部件领域拥有丰富经验的制造商。他们的K系列零部件采用精密工程设计，可确保稳定的卡扣配合性能和长期耐用性。